Note: |
•When moving or copying to another element configuration, attention must be paid to the usage of the elements. If substructures remain in the old element configuration, access rights may have to be granted. •If a short code is stored with the source element, and its element configuration is changed for an element configuration without permission for a short code, the existing short code is deleted, and a corresponding warning message is listed in the log. |
The "Exchange element configuration" function provides the option to move one or more marked elements to another element configuration. The move is started using the "Mass changes" button in the Menüband.
Procedure:
Selection of the elements to be moved (see "Massenänderungen")  Example: Move from "MTM analysis" element configuration to "MTM standard" element configuration |
Selection of the element configuration to which the elements are to be moved.
|
Execute the exchange or previously Check. |
Note: |
Only the system administrator can create or edit element configurations (e.g. rights, pictograms). |