In the "Workplace organization" tab, the general conditions of the workplace and the criteria for evaluating physical strains are displayed and edited.
The input mode must be selected before any entries are made. This determines the further procedure and the resulting entries.
Tab Workplace organization
The following possible entries are available:
Input mode |
Calculation of |
Number of cycles/Working time (net) |
Cycle time |
Number of cycles/Working time (gross) |
Cycle time |
Number of cycles/cycle time |
Working time (net), Working time (gross) |
Number of cycles |
Working time (net), cycle time (flexible*) |
Working time (net)/cycle time(1) |
Number of cycles |
Working time (gross)/cycle time(1) |
Number of cycles |
Working time (net)(1) |
Number of cycles, Cycle time (flexible)* |
Working time (gross)(1) |
Number of cycles, Cycle time (flexible)* |
(1) Inactive, if at least 1 variant is available.
* The highest volume of work or the most efficient worker gives the cycle time.
Definitions:
Number of cycles = Total quantity
Shift duration (net) = Working time (net)
Shift duration (gross) = Working time (gross)
Note: |
In the administration, it is possible to preset and potentially lock the input mode and all other values for the element configuration of the balancing in the "Arbeitsplatzorganisation" tab. It is possible to maintain a list for breaks in the administration. However, you can also add or delete breaks directly in the workplace organization of a balancing in the ribbon or via the context menu, if changes are allowed. |
By clicking on the unit in the row to be edited, a menu opens where you can enter the value in the desired time unit. This saves effort when converting.
Workplace organization in mix balancing and maximum balancing
In a mix balancing or maximum balancing, the number of cycles is not freely selectable, but is calculated from the number of pieces of the variants.
Workplace organization in mix balancing and maximum balancing