Administration > Element Attributes > Coding Schema > Details

The following value input types can be selected in value definition. Depending on the selection, various settings can be made.

free value set (numeric)

If a free value quantity is of the type numerical, a minimum and maximum value has to be entered for the code part. If minimum and maximum value are empty, any value can be entered.

Admin_Kodierungsschema_freie_Wertemenge_1

Value definition means: Number between 1 and 22 (each including)

free value set (alphanumeric)

If a free value set is of the type alphanumeric, numbers and letters can be entered as a code part. If the value definition is empty, all alphanumeric characters can be used.

Admin_Kodierungsschema_freie_Wertemenge

The following special characters in connection with one or several alphanumeric characters limit the code assignment (the code part contains in all examples two positions):

Characters	Meaning / Example
[]	Areas of alphanumeric characters [A-C][D-F] - the first position of the code can contain the characters A, B, C, and the second position the characters D, E, F.
.	Any character .A - The first character is arbitrary, the 2nd character must be an A.
$	Last character A$ - the last character must be an A, the $ sign must come after the A.
^	First character ^A - the first character must be an A, the ^ character must come before the A.
*	Any number of characters G* - any number of Gs can be contained in the code part. It is allowed to assign no Gs.
+	Any number of characters G+ - any number of Gs can be contained in the code part. At least one G must be assigned.
[^]	Not allowed sign [^A] - an A must not be entered at this position.

These expressions can be combined with each other in any way.

fixed value set

All values valid for a code part are entered with a description.

Admin_Kodierungsschema_feste_Wertemenge

Please note:

If the wildcard character * is used as value, any characters can be used on the position of the wildcard character.

Multi-digit value sets:

For multi-digit value sets, for example, 3 digits, either all three values can be defined or only individual positions. The other positions are automatically filled with fill characters. Fill characters can also be entered directly when creating the value definition. The individual values of the value definition must be unique.

Admin_Kodierungsschema_feste_Wertemenge_2

Example of value definition with fill characters where values are not unique

Fill character

Only fill characters may be entered into the corresponding code positions. A fill character must not be empty. If the fill character is deleted and saved afterwards, a point is assigned to the fill character.

Number range (sequential)

For the defined part of a code a sequential number is generated by the system. The administrator can define the number with which the next element is created and the step size between the numbers.

Admin_Kodierungsschema_Nummernkreis

Possible settings for the number range

Please note:

•Minimum value default = 1; empty or < 0 not allowed

•Maximum value default corresponds to the number of possible positions and the maximum value; it is not allowed to be empty. --> So 999 means that the number cycle can have a maximum of 3 positions, with 999 as the largest possible number.

•In the case of a multi-digit number cycle (e.g. 999), the first positions are filled with the fill character as long as they are not used (e.g. ..6).

Admin_Kodierungsschema_Nummernkreis_Anwendung

Number range (code-specific)

For the defined code part, a sequential number is generated by the system depending on the previous code. The administrator can define the step size between the numbers.

Admin_Kodierungsschema_Nummernkreis_kode