TiCon EAWS > EAWS Analysis > Workplace Organization

In the Workplace organization tab the general conditions of a project (monitored task or standard task) are displayed and can be edited.

The input in this tab is only taken from the administration settings, when a new element is created. Subsequent changes in the administration do not affect existing elements.

Note:

•In the administration, it is possible to define several settings for the element configuration in the "Arbeitsplatzorganisation" tab.

•The "Workplace organization" tab does not necessarily have to be active. If the "Workplace organization" tab is not active, the default values in the administration must be defined, as otherwise EAWS® evaluation is not possible.

EAWS_Arbeitsplatzorga

"Workplace organization" tab of an EAWS® analysis

You can select one of the various input modes to enter the data. Select which data you would like to specify and which data TiCon should calculate automatically. It does not matter which input mode is used to calculate the values for the EAWS® evaluation.

The following possible entries are available:

Input mode	Calculation of
Number of cycles/Working time (net)	Cycle time, working time (gross)
Number of cycles/Working time (gross)	Cycle time, working time (net)
Number of cycles/cycle time	Working time (net), Working time (gross)
Working time (net) / cycle time	Number of cycles, working time (gross)
Working time (gross) / cycle time	Number of cycles, working time (net)

Definitions:

Number of cycles = Total quantity

Shift duration (net) = working time (net) = working time of an operator per shift without break time (pure working time)

Shift duration (gross) = working time (gross) = attendance time of an operator per shift, i.e. effective working time incl. non-repetitive parts and all breaks

In addition, the contents of the following fields also play a corresponding role for the EAWS® evaluation and are included in the evaluation as follows:

Field	Evaluated in ...
Breaks / Work organization	Section 4	Upper limbs
Working time (net) (Shift duration (net))	Section 1, 2, 3 and 4	Body postures, forces and loads, and upper limbs
Cycle time	Section 1, 2, 3 and 4	Body postures, forces and loads, and upper limbs
Workplace	Section 1	Body postures, forces and loads, and upper limbs
Height percentile	Only displayed for information, not evaluated	-
Gender	Section 2 and 3	Forces and loads

Note:

It is possible to maintain a list for breaks in the administration. However, you can also add or delete breaks directly in the workplace organization of the relevant element in the ribbon or via the context menu, if changes are allowed. Only breaks with a minimum duration of 8 minutes are relevant for evaluation.